Answers are grounded in this paper and cite their sources.
This study deals with the optimization of the location of a synthetic jet on the suction side of an airfoil to control stall. The optimal location is found by coupling a time-accurate flow solver with adaptive mesh refinement/coarsening techniques and an automatic optimization algorithm. The flow and jet are modeled by the unsteady Reynolds-averaged Navier-Stokes equations (URANSE) with a near-wall low-Reynolds number turbulence closure. An unstructured grid refinement/coarsening method is used to automatically generate meshes adapted to the presence of the synthetic jet at a prescribed location. An optimization algorithm modifies the location of the synthetic jet to determine the best actuator location to increase the time-averaged lift for high angles of attack. The proposed methodology is applied to optimize the location of a synthetic jet on the suction side of the NACA 0012 airfoil at a Reynolds number Re=2×106 and incidences of 18deg and 20deg. Finally, a physical analysis of the influence of the synthetic jet location on the control efficiency is proposed to provide some guidelines for practical jet positioning.
No takes yet. Share an insight, caveat, or question.
Duvigneau et al. (2007) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: