Answers are grounded in this paper and cite their sources.
The present study evaluated 15 isolates obtained of environmental samples capable of tolerating high Ni and V concentrations. Those coded as MNSH2-PHGII-1, MNSH2-PHGII-2 and MV-PHGII-2 showed a minimum inhibitory concentration higher than 200 ppm for Ni and V and showed removal percentages corresponding to 84, 75 and 26% for Ni and 60, 55 and 20.3% for V, respectively, in liquid medium. When spent catalyst was added at 16% (w/v) pulp density, the highest Ni and V removal corresponded to MNSH2-PHGII-1 and MNSH2-PHGII-2, which were identified as Microbacterium oxydans and Microbacterium liquefaciens respectively, Microbacterium oxydans was able to remove Ni at the extent of 45.4% and V at 30.4% while Microbacterium liquefaciens removed Ni at 51% and V at 41.4% from the spent catalyst. The isolate MV-PHGII-2 identified also as Microbacterium oxydans showed the lowest removal for Ni and V corresponding to 16% and 9.5%, respectively. This is the first report where strains of Microbacterium were tested for their abilities to remove Ni and V from spent catalyst, suggesting its potential use in the treatment of this solid industrial waste.
No takes yet. Share an insight, caveat, or question.
Gómez‐Ramírez et al. (2015) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: