Answers are grounded in this paper and cite their sources.
This paper presents a theoretical-cum-experimental study of the free vibration characteristics of thin-walled composite box beams with bending-twist and extension-twist coupling under rotating conditions. The governing equations in generalized displacements were derived using a Newtonian approach. The composite structural model in the derivation used a solid-section approach and contained transverse shear-related couplings and appropriate cross-section warping. The free vibration characteristics of composite box beams were determined by the Galerkin method. In order to validate the theory, glass-epoxy, kevlar-epoxy and graphite-epoxy symmetric and antisymmetric box beams were fabricated using an autoclave molding technique, and tested in an in-vacuo rotor test facility for their vibration characteristics. Beam excitation in the rotating condition was effected by means of induced-strai n actuation with the help of piezoceramic bending elements. Strain gages were used to measure the response of the first three modes over a range of rotational speeds up to 1000 rpm. It was determined that the experimental frequencies and mode shapes correlated satisfactorily with the theoretical results. It is shown also that bending-shear coupling influences the flexural vibration frequencies of antisymmetric box beams significantly. Extension-shear coupling, on the other hand, does not influence the flexural-torsion vibration frequencies of symmetric box beams significantly.
No takes yet. Share an insight, caveat, or question.
Chandra et al. (1992) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: