Answers are grounded in this paper and cite their sources.
Delayed fracture experiments were made in tension, torsion and compression, the times to fracture under a series of constant loads being determined. The materials tested were brass in ammonia vapour, polymerized methyl methacrylate (p.m.m.) in liquid carbon tetrachloride, and glass in air. In all cases delayed fracture is attributed to the gradual spread of cracks caused by the preferential attack by the surrounding medium of the highly stressed material at the ends of the cracks. In tension, fractures were transverse and in torsion they were helical. In the case of brass and glass, subjected to tension and torsion, fracture of the respective materials occurred in not greatly differing times when the materials were subjected to the same maximum nominal principal tensile stresses. P.m.m. withstood higher nominal principal stress in torsion than in tension for equal times to fracture. The p.m m. results were complicated by the absorption of carbon tetrachloride, which was greatly accelerated by tension or torsion stresses. During the time occupied by the tests, absorption was inappreciable when the p.m.m. was stress-free or stressed in compression. In no case did delayed fracture occur in compression.
No takes yet. Share an insight, caveat, or question.
Gurney et al. (1948) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: