Answers are grounded in this paper and cite their sources.
This study reports the synthesis of a magnetic halloysite-based catalyst (Ha@Fe₃O₄), which was prepared using halloysite clay sourced from Western Cameroon, and its application in the heterogeneous Fenton degradation of quinoline yellow (E104). The successful deposition of magnetite nanoparticles onto the halloysite structure was confirmed using FTIR, XRD, SEM-EDX, and TGA analyses. The catalytic performance of Ha@Fe₃O₄ was evaluated by examining the effects of solution pH (3–7), catalyst dosage (50–100 mg), initial dye concentration (50–150 mg/L), and H₂O₂ concentration (0.5–1.5 mmol/L). Adsorption experiments revealed low removal efficiencies after 60 min: 1.81% for raw halloysite and 10.33% for the magnetic composite. However, in the presence of hydrogen peroxide, the catalyst achieved a degradation efficiency of 68.11% with 100 mg of catalyst and 1.5 mol/L of H₂O₂. Response surface methodology indicated optimal conditions at pH 3.0, a dye concentration 84 mg/L, a catalyst dosage of 74 mg, and a H₂O₂ concentration of 1.0 mol/L, yielding a degradation efficiency of 77.33%, in good agreement with model predictions. The quadratic model showed good statistical reliability (R² = 92.41%, R² adjusted = 82.24%). Kinetic analysis revealed that degradation followed the pseudo-first- and pseudo-second-order models. Reusability tests demonstrated that the catalyst retained over 55% of its initial efficiency after five cycles, highlighting its potential for wastewater treatment.
No takes yet. Share an insight, caveat, or question.
Foko et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: