Answers are grounded in this paper and cite their sources.
In vitro study reveals reduced shear bond strength on zirconia using silicon carbide burs, indicating airborne-particle abrasion remains the optimal surface treatment.
Purpose: This in-vitro pilot study aimed to investigate the effect of a silicon carbide grinding bur on the shear bond strength (SBS) between zirconia and 10-MDP-containing cement. Materials and methods: Thirty zirconia specimens were prepared and randomly assigned to three groups based on surface pretreatment: airborne-particle abrasion with aluminum oxide particles (APA), treatment with a silicon carbide grinding bur (SiC bur), and airborne-particle abrasion followed by silicon carbide bur treatment (APA + SiC bur). All specimens were bonded with an adhesive resin cement (PANAVIA V5), aged with 5,000 thermocycles, and subjected to an SBS test. Statistical analysis was performed using one-way analysis of variance (ANOVA) and Tukey's post hoc test (α = 0.05). Fracture modes were assessed. Conclusion: Silicon carbide bur treatment did not have a beneficial effect on SBS after 5,000 thermocycles. Airborne-particle abrasion resulted in significantly higher SBS than silicon carbide bur treatment alone or airborne-particle abrasion followed by silicon carbide bur treatment. Clinical relevance: Under the tested conditions, the silicon carbide bur cannot be recommended as an alternative or an adjunct to airborne-particle abrasion for improving zirconia-resin cement bonding.
No takes yet. Share an insight, caveat, or question.
Aburawa et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: