Answers are grounded in this paper and cite their sources.
The influence of the thickness of a high-temperature AlN (HT-AlN) buffer layer on the properties of an InAlN/GaN high-electron-mobility transistor (HEMT) grown on a sapphire substrate was investigated. As revealed by atomic force microscope analysis, a rougher surface and larger grain size were observed with a thicker buffer layer. The larger grains promoted the two-dimensional (2D) growth mode of the GaN layer at the initial growth stage. This suppressed oxygen incorporation at the GaN/HT-AlN interface and thus improved the resistivity of the GaN layer. Moreover, the lower grain density also resulted in enhanced GaN crystal quality of the GaN layer. As a consequence, the electrical properties of the InAlN/GaN HEMT device, such as output current, transconductance and off-state breakdown voltage, were improved by increasing the HT-AlN buffer layer thickness.
No takes yet. Share an insight, caveat, or question.
Huang et al. (2015) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: