Answers are grounded in this paper and cite their sources.
A general design for a non-radiating dual-band N-way series power divider (SPD) is presented in this paper. The non-linear phase responses of composite right and left handed transmission-line (CRLH-TL) and non-radiating CRLH-TL (NR-CRLH-TL) are used to achieve the desired dual-band performance. Theory and design procedure of this divider are analyzed in detail. For demonstration, a dual-band 3-way power divider was designed, fabricated and tested at two arbitrary design frequencies: 0.915 GH (UHF) and 2.440 GHz (ISM). There is nearly equal and in-phase power division to all three output ports in the two passbands while the measured input return loss remains below 10 dB. Also, the dual-band divider presents the benefit of setting the output ports arbitrarily apart. In addition, the dual-band nature of the proposed SPD, low cost and easy integration with printed antenna make it well suited for feeding dual-band planar antenna arrays. To verify the performance of the proposed divider, the designed dual-band 3-way SPD is used as a series feed network for a linear array of printed monopole antennas, designed to radiate in the broadside direction. It is shown that the proposed dual-band planar antenna array experiences a decrease in the amount of beam squinting with a change in frequency for both the operating bands.
No takes yet. Share an insight, caveat, or question.
Bemani et al. (2013) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: