Answers are grounded in this paper and cite their sources.
( K 0.5 Na 0.5 ) ( Nb 1 − x Ta x ) O 3 (KNNT)-based ceramics have been synthesized via a solid-state reaction. In this study, KNNT-based ceramics were sintered at atmospheric pressure by adding small amounts of sintering aid [0.38mol% K5.4Cu1.3Ta10O29]. The (K0.5Na0.5)NbO3 (KNN) ceramics which synthesized by using the K5.4Cu1.3Ta10O29 showed “hard” piezoelectric characteristics such as a high mechanical quality factor (Qm=1300) and low tanδ (0.4%). The quantitative effects of Ta on the electrical properties of (K0.5Na0.5)(Nb1−xTax)O3–K5.4Cu1.3Ta10O29 ceramics were also examined. Ta substitution provides “soft” piezoelectric characteristics and a large electrostrictive effect for KNN, which resulted in an improvement in kp, εr, strain, and d33 of KNNT ceramics depending upon the Ta content. Especially, (K0.5Na0.5)(Nb0.7Ta0.3)O3 showed the maximum strain and d33 values of 0.11% (at 40kV∕cm) and 270pm∕V (at 30–40kV∕cm), respectively. This strain level is comparable to that of hard Pb(Zr,Ti)O3 ceramics.
No takes yet. Share an insight, caveat, or question.
Matsubara et al. (2005) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: