Answers are grounded in this paper and cite their sources.
Quantifying heat transfer from flames to adjacent surfaces is critical for accurate fire growth predictions and assessing potential fire hazards. Total surface heat flux includes contributions from both convection and radiation, but separating these components experimentally is challenging. This study presents an evaluation of three independent methods for separating heat transfer modes. These include a blocked convection approach with infrared-transparent windows, a varied convection approach pairing a high-temperature and water-cooled sensor, and a varied surface absorptivity approach using inverse heat transfer on a checkerboard-patterned plate. Experiments were conducted using Natural Gas and Propane flames adjacent to a vertical wall over a range of heat release rates. Radiation increased with flame size but plateaued in the base of the flame at high fire Froude numbers. The varied convection method yielded the highest radiation estimates and proved most robust in sooty conditions. The windowed gauge and absorptivity-based approaches showed good agreement with each other but were more sensitive to fouling and surface property uncertainties. No single method provided a definitive separation of heat transfer modes, but their combined use constrained the range of plausible values. The measurements indicate that convection plays a larger role than often assumed near the flame base.
No takes yet. Share an insight, caveat, or question.
Hodges et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: