Answers are grounded in this paper and cite their sources.
In vivo animal study reveals enhanced bone regeneration with porous 3D-printed titanium implants in rabbits, suggesting improved osseointegration.
The present study aimed to investigate the surface characteristic, biocompatibility, and bone regeneration behavior of an innovative three-dimensional (3D) printed titanium (Ti) implant with a biomimetic cancellous bone-like spherical particle porous structure (3DBCP-Ti) through scanning electron microscopy, X-ray diffractometry, static contact angle goniometry, cytotoxicity assay, and rabbit model. The analytical results showed that the 3DBCP-Ti implant with an average pore size of 400 ± 10.5 μm can be fabricated using a selective laser sintering method. The 3DBCP-Ti implant not only possessed excellent wettability (13.5 ± 1.7°) but also presented superior cell viability (97 ± 1.5 %) in vitro. After implantation for 4 weeks, the bone mineral density of the 3DBCP-Ti implant (0.14 ± 0.02 mg/cm3) exhibited a slightly higher value than the control implant (0.13 ± 0.03 mg/cm3). Moreover, histological results also indicated that the new bone formation area of the 3DBCP-Ti implant (43.9 ± 7.0 %, *p < 0 0.05) significantly enhanced as compared with the control (23.5 ± 4.6 %) and blank (18.2 ± 1.4 %) groups at week 12 post-implantation. Accordingly, these findings demonstrate that the innovative 3DBCP-Ti implant has the potential to promote osseointegration at early-stage implantation for dental, orthopedic, and neurosurgical applications.
No takes yet. Share an insight, caveat, or question.
Mappa et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: