Answers are grounded in this paper and cite their sources.
Immobilization of Catalase and GlucoseOxidase on Inorganic SupportsGlucose oxidase and catalase have been individually immobilized on several inorganic supports using the glutaraldehyde procedure.Enzymic activity depended on the support type and the particle size of the support used in the assay.Interestingly, the least expensive supports exhibited the highest activity for both small and large particle sizes.The purpose of the study was to screen a number of inorganic supports for use in industrial immobilized enzyme reactors.Consequently emphasis was placed on determining the initial activity of the catalysts rather than on determining the efficiency of the immobilization procedure. EXPERIMENTAL PROCEDUREGlucose oxidase or catalase was immobilized on various solid supports using glutaraldehyde as a crosslinking agent.Descriptions of the supports are reported in Table I.The supports were ground individually and four particle size ranges were collected: 0-12.5, 125-250, 2.50-,500, and ,500-1000 microns.Equal amounts of each size range were then mixed so that the immobilization could be conducted simultaneously on all size ranges.Silanization' consisted of refluxing the support in 10% (by weight) 7-aminopropyltriethoxysilane in toluene for 24 hr.The support was washed with 5 volumes of toluene followed by an analogous acetone wash.The support was then allowed to air dry for 24 hr.In preparation for the immobilization step, the support was mixed with a solution containing 2.57, (by volume) glutaraldehyde for 30 min at reduced pressure and 60 min at atmospheric pressure.The glutaraldehyde solution was decanted and the support was washed with 4 volumes of distilled water.The support was then ready for immobilization with either enzyme.Catalase was immobilized onto the supports a t 5'C by placing 2 g of the support, in 2 ml of catalase solution (Worthington Biochemical Company 45,000 p/ml) for 30 min a t reduced pressure and 30 min at atmospheric pressure.The support was then washed with 3 volumes of 0.1M citrate-phosphate buffer, pH 7.0.Glucose oxidase was immobilized at room temperature placing 2 g of the support in a solution containing 5 ml of boric acid-sodium borate buffer, pH 7.5, and 2 mg of glucose oxidase (Worthington Biochemical Company 105 p/ml).The immobilized enzyme was then washed five times with citrate-phosphate buffer, pH 5.5.The immobilized supports were separated according to particle size range by wet sieving using citrate-phosphate buffer solutions.One drop of toluene ww added to each vial in order to prevent bacterial growth.The immobilized supports were stored in buffer at 5°C until use.Catalase activity was measured by adding approximately 20 mg of the support to a sample vial of a Yellow Springs oxygen monitor containing 3 ml of pH 10970290, 1975, 2, Downloaded from https://onlinelibrary.wiley.com/
No takes yet. Share an insight, caveat, or question.
Markey et al. (1975) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: