Answers are grounded in this paper and cite their sources.
Early and rapid detection of Escherichia coli O157:H7 is required to prevent food and water-borne outbreaks. Several diagnostic methods have been developed in recent decades; it is imperative to find the most sensitive and specific detection method to identify E. coli O157:H7 at the point-of-care (POC) settings. Recombinase polymerase amplification-lateral flow assay (RPA-LFA) has emerged with significant potential of POC application. Therefore, this study aimed to compare RPA-LFA with polymerase chain reaction (PCR), real-time PCR (qPCR), loop-mediated amplification (LAMP) for use in the diagnosis of E. coli O157:H7. A total of 10 different food and beverages were collected, spiked, and tested, with all four detection methods combined with a lab-dependent (commercial kit) and field-deployable nitrocellulose paper-based DNA extraction method. A comparison of all four techniques based on important parameters such as Affordability, Sensitivity, Specificity, User-friendly, Rapid, Equipment-free, and Deliverability (ASSURED) was also conducted. In addition, the quantitative signal amplification by RPA-LFA was achieved through integration with a benchtop lateral flow strip reader. For results, no significant difference was observed in terms of specificity (100% specific) among the detection techniques regardless of the DNA extraction method. In terms of sensitivity, for the commercial DNA extraction kit, the sensitivity of RPA-LFA was significantly higher compared to the other 3 techniques when applied to food and beverage samples (p < 0.05). The RPA-LFA was found the most sensitive method while LAMP was the least sensitive in detecting E. coli O157:H7 from solid matrices. For the field-deployable DNA extraction method, the sensitivity was also found to be significantly higher for RPA than qPCR, PCR, and LAMP (p < 0.05), irrespective of matrices type. The overall sensitivity of RPA-LFA was higher for beverages than foods. In summary, the in-house developed nitrocellulose strips can be used to extract DNA from E. coli O157:H7 in under 1 min which can be amplified using RPA at 39 °C for 15 min. Moreover, Sanger sequencing confirmed the specificity of the RPA technique for target amplification. The RPA-LFA, combined with an in-house developed field-deployable DNA extraction method showed potential as a POC detection tool to identify contamination in less than 25 min.
No takes yet. Share an insight, caveat, or question.
Batra et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: