Answers are grounded in this paper and cite their sources.
Ensuring material supply security requires greater utilization of local resources, including the valorization of oil shale kerogen into value-added chemicals instead of its conventional use for energy production. This study investigated nitric acid (HNO 3 ) oxidation as a direct route for the conversion of kukersite oil shale kerogen into aliphatic dicarboxylic acids (DCAs). Oxidation experiments were conducted under atmospheric and pressurized conditions to evaluate the effects of temperature, reaction time, HNO 3 concentration and amount, pressure, and reactor material on DCA yield and product distribution. Elevated pressures (10–15 bar) enabled DCA yields of ∼30% within short reaction times (30–40 min) at 130–140 °C. Temperature and HNO 3 concentration were identified as the primary factors governing DCA yield once a sufficient oxidant amount was present. Elevated pressure increased reaction rates through greater availability of reactive species. Reaction conditions influenced product distribution, with harsher conditions promoting the formation of shorter-chain DCAs (C4–C6), while milder conditions favored longer-chain DCAs (C7–C11). High yields were achieved using 30 wt% nitric acid, indicating that higher concentrations provide limited benefit relative to increased oxidant consumption and safety considerations. These findings demonstrate a viable and scalable route for the valorization of kukersite kerogen into chemical intermediates and provide the experimental basis for the development of the Kerox process.
No takes yet. Share an insight, caveat, or question.
Reinaas et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: