Answers are grounded in this paper and cite their sources.
An investigation was conducted on the performance characteristics and flowfield phenomena of a wing in ground effect. Model tests were performed in low-speed wind tunnels equipped with moving ground. A highly cambered single element wing, with the suction surface nearest to the ground, was used to investigate the effect of changing both the ride height from the ground and the incidence. Data obtained in model tests included force balance measurements, surface pressure results, and surface oil flow visualization. Results are compared with the freestream ase. As the ride height is reduced, higher levels of downforce were recorded; at clearances between the suction surface and the ground of less than 20% chord, the downforce is significantly higher. Closer to the ground, at a ride height of less than 10% chord, downforce drops as the wing stalls. This force reduction phenomenon is shown to be due to trailing-edge separation of the boundary layer. The effect of transition fixing was found to be significant, especially in terms of levels of downforce generated in ground effect.
No takes yet. Share an insight, caveat, or question.
Zerihan et al. (2000) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: