Answers are grounded in this paper and cite their sources.
In this study, a simplified multicomponent technique for modeling the 2D sediment transport in the vicinity of navigation channels to harbors is formulated. The main simplification assumes that longshore current is the only factor transporting sediments to the offshore navigation channel. The technique requires the application of three numerical models: NMLONG model (ID depth averaged finite difference wave model), RMA2 (2D depth averaged finite element hydrodynamic model) and SED2D (2D depth averaged finite element sediment transport model). RMA2 is forced at the inflow boundary using longshore velocity profiles generated by the incoming waves via the application of NMLONG model. Output of NMLONG provides also the boundary condition of SED2D which takes a velocity field input from RMA2. A variable manning coefficient is used inside RMA2 domain to account for wave roughness. Data collected in the period from 1989 to 1997 in the vicinity of the navigation channel of Damietta Harbor (Egypt) is used to calibrate the multicomponent technique. The results show that the technique explains well the observed spatial variation of bed change in the navigation channel.The calibrated technique is then applied to study different solutions to reduce sedimentation in Damietta Harbor navigation channel. The results showed that the optimum solution found can significantly reduce the amount of sedimentation. For sedimentation caused by west-to-east longshore current, the reduction amount range is 62–74% (i.e. only 26–38% of the current sedimentation shall occur). For sedimentation caused by east-to-west longshore current, the reduction percentage reaches 60–70%.
No takes yet. Share an insight, caveat, or question.
Gad et al. (2013) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: