Answers are grounded in this paper and cite their sources.
This study numerically investigates jet impingement cooling using cone-shaped nozzles on a ribbed target wall. The present study examines the influence of extended cone-shaped jet holes on the flow characteristics and heat transfer performance in an impingement cooling system with a ribbed target wall. The flow is numerically analyzed under 4100 ≤ Renzl ≤ 16,250 turbulent operation conditions. Six impingement jets are arranged in a straight line, and the nozzles and holes of the jets are used to extend toward the target wall. The numerical simulations employ the Reynolds-averaged Navier-Stokes (RANS) equations integrated with the shear stress transport (SST) k-ω turbulence model to evaluate the flow dynamics across varying nozzle heights. The numerical data of the cone-shaped nozzle are compared with experimental data of the circular nozzle in a jet impingement system at Gnzl/Dnzl = 6.0 (nozzle-to-target spacing ratio). Results showed that extended jet impingement cooling achieved maximum heat transfer enhancement at Re = 16,250 and Gnzl/Dnzl = 3.5, yielding the highest average Nusselt number, increased from 57.87 to 68.75, representing an 18.79% enhancement in thermal performance. For the circular-shaped extended nozzle configuration, the maximum average Nusselt number of 50 is achieved at a Reynolds number of 16,250. Therefore, a 35.31% enhancement in the average Nusselt number is observed when comparing the extended cone-shaped nozzle configuration to the circular-shaped nozzle with ribs under the same Reynolds number conditions.
No takes yet. Share an insight, caveat, or question.
Khan et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: