Answers are grounded in this paper and cite their sources.
This letter reports the first implementation of a hydrogen-plasma-based edge termination technique (HPET) in vertical GaN p-n power diodes grown on bulk GaN substrates using metalorganic chemical vapor deposition. The device with a 9-μm-thick drift layer exhibited a high breakdown voltage (Vbd) of 1.57 kV, a low ON-resistance (RON) of 0.45 mQ · cm2(or 0.70 mQ · cm2with current spreading considered) and a high Baliga's figure-of-merit (Vbd2/RON) of 5.5 GW/cm2(or 3.6 GW/cm2) without passivation or field plate, which are close to the theoretical limit of GaN. This technique enabled a significant reduction in leakage current (-106times at -300 V) and a huge enhancement in Vbd(from -300 V to 1.57 kV). Furthermore, the device showed good forward characteristics with a turn-ON voltage of 3.5 V, an ON-current of -2 kA/cm2(or 1.3 kA/cm2), an ON/OFF ratio of -109, and an ideality factor of 1.4. This work shows the HPET can serve as an effective, low cost, and easy-to-implement edge termination technique for high voltage and high power GaN p-n power diodes.
No takes yet. Share an insight, caveat, or question.
Fu et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: