Answers are grounded in this paper and cite their sources.
Ferroelectric ceramics of strontium bismuth tantalate, SrBi 2 Ta 2 O 9 (SBT), have been synthesized in pure layer-structured perovskite phase by two new soft chemical techniques, namely, a sol−gel process and a coprecipitation method. The sol−gel process utilizes ethylene glycol as solvent while the coprecipitation technique makes use of a poly(ethylene glycol) 200 (PEG) and methanol mixture as solvent. The microstructure and properties of the ceramics have been studied and discussed. The sol−gel-derived ceramics sintered at 1200 °C for 8 h show good dielectric and ferroelectric properties with a relative density of 96%, a dielectric constant ε‘ = 227, a remnant polarization P r = 7.6 μC/cm 2 at room temperature, and a maximum dielectric constant ε‘ max = 950 at the Curie temperature T C = 330 °C. In comparison, the SBT ceramics prepared using the coprecipitation method and sintered under the same conditions show a platelike microstructure with preferential grain orientation along the [00 10 ] direction, a relative density of 85%, an ε‘ of 235, a P r of 3.7 μC/cm 2 at room temperature, and an ε‘ max of 850 at T C = 330 °C. The sol−gel-derived ceramics show superior dielectric and ferroelectric properties than the ceramics prepared by the solid-state reactions (ε‘ max ≈ 500 and P r = 4.5 μC/cm 2 ), which can be attributed to a denser and more homogeneous microstructure with a better distribution of grain orientations, thus reducing the preferential grain orientation along the nonpolar c -axis.
No takes yet. Share an insight, caveat, or question.
Babooram et al. (2005) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: