Answers are grounded in this paper and cite their sources.
Transparent p-type conductive BaCuSeF films prepared by pulsed laser deposition (PLD) were studied for application to tandem configuration solar cells. The BaCuSeF films were deposited at low substrate temperatures (T S) of 150, 200, 250, and 300 °C. The films prepared at T S ≥ 200 °C showed considerably high transmittance in the visible light region. The highest transmittance of 63% was obtained for the film deposited at T S = 300 °C. All of the films showed p-type conductivities of more than 1 S/cm. These BaCuSeF films were deposited on the CdTe surface of CdS/CdTe solar cells. A high conversion efficiency of 2.82% was obtained for the solar cell with the transparent p-type conductive BaCuSeF film deposited at T S = 200 °C. The higher efficiency of 3.12% was obtained by inserting a thin Ni0.97Li0.03O buffer layer between the BaCuSeF and CdTe layers.
No takes yet. Share an insight, caveat, or question.
Yamamoto et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: