Impact of n-Octanol Addition on Combustion Performance and Emissions in UAV Power Systems

The present study experimentally investigates the influence of n-octanol addition to Jet-A fuel on the combustion performance and emission behavior of a micro-turboprop-based hybrid UAV (“Unmanned Aerial Vehicle”) power system. The experiments were conducted on a dedicated hybrid propulsion test bench equipped with a KingTech micro-turboprop engine mechanically coupled to a T-Motor electric generator and supplying a regulated 48 V DC bus. The system is capable of delivering approximately 3 kW of continuous electrical power, with peak values reaching 3.5 kW. Jet-A and three n-octanol/Jet-A blends containing 10%, 20%, and 30% n-octanol by volume, denoted O10, O20, and O30, respectively, were tested under four operating regimes ranging from idle to 2500 W electrical load. Exhaust gas temperature, carbon monoxide, sulfur dioxide, nitrogen oxides, electrical output, and near-field pollutant dispersion were evaluated. The results show that n-octanol addition affects engine behavior in a strongly load-dependent manner. At idle, the O10 blend reduced CO concentration from approximately 2520 ppm for Jet-A to approximately 2270 ppm, corresponding to a reduction of about 9.9%. At the same operating condition, O10 reduced exhaust gas temperature from approximately 498.3 °C to 463.2 °C, while O20 and O30 produced stronger cooling effects. At intermediate regimes, the oxygenated molecular structure of n-octanol contributed to lower CO formation in selected cases, indicating improved combustion-completeness behavior. At high load, however, exhaust gas temperatures converged toward or exceeded those of Jet-A, particularly for O30, showing that higher octanol fractions may introduce additional thermal constraints. Among the tested fuels, O10, corresponding to 10% n-octanol by volume, provided the most balanced behavior across the investigated operating range, from idle to 2500 W electrical load. The dispersion measurements performed at 30 m from the source further showed that ambient pollutant concentrations are strongly influenced by wind speed, wind direction, and plume transport. These findings support moderate n-octanol blending as a promising transitional strategy for small-scale hybrid UAV propulsion systems, while highlighting the need for future repeated testing, direct fuel-flow measurement, and numerical dispersion modeling.