Answers are grounded in this paper and cite their sources.
This work designs a new system (1-x)Na0.5Bi0.5+yTiO3-xNaTaO3 with a nonstoichiometric bismuth ratio, which is used as dielectrics of ceramics capacitors. Phase structure evolution of (1-x)Na0.5Bi0.5+yTiO3-xNaTaO3 is characterized using XRD, Raman and TEM. Dielectric and resistant properties of (1-x)Na0.5Bi0.5+yTiO3-xNaTaO3 are investigated with increasing concentration of NaTaO3. With these investigations, the structure and defect chemistry of (1-x)Na0.5Bi0.5+yTiO3-xNaTaO3 are rationalized and their respective impact on capacitor properties are elucidated. The optimized composition 0.8Na0.5Bi0.51TiO3-0.2NaTaO3 possesses an ultra-wide operating temperature range (-92–398 °C), in which both stable permittivity and low dielectric loss is obtained. Furthermore, the fabrication of multilayer ceramics capacitors (MLCC) based on 0.8Na0.5Bi0.51TiO3-0.2NaTaO3 dielectrics is investigated. With the addition of sintering aids, 0.8Na0.5Bi0.51TiO3-0.2NaTaO3 could be co-fired with Ag at 910 °C in air, and the low temperature co-fired ceramic (LTCC) capacitors maintain good temperature stability of permittivity and low dielectric loss in -100–352 °C. Therefore, our work provides a new route for preparing ultra-wide operating temperature capacitors at low manufacturing costs.
No takes yet. Share an insight, caveat, or question.
Ren et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: