Two copolyimides, LARC-STPI and STPI-LARC-2, with flexible backbones were prepared and characterized as adhesives. The processability and adhesive properties were compared to those of a commercially available form of LARC-TPI. Lap shear specimens were fabricated using adhesive tape prepared from each of the three polymers. Lap shear tests were performed at room temperature, 177°C, and 204°C before and after exposure to water-boil and to thermal aging at 204°C for up to 1000 hours. The three adhesive systems possess exceptional lap shear strengths at room temperature and elevated temperatures both before and after thermal exposure. LARC-STPI, because of its high glass transition temperature provided high lap shear strengths up to 260°C. After water-boil, LARC-TPI exhibited the highest lap shear strengths at room temperature and 177°C, whereas the LARC-STPI retained a higher percentage of its original strength when tested at 204°C [68% versus 50% (STPI-LARC-2) and 40% (LARC-TPI)]. These flexible thermoplastic copolyimides show considerable potential as adhesives based on this study and because of the ease of preparation with low cost, commercially available materials.
No takes yet. Share an insight, caveat, or question.
Progar et al. (1987) studied this question.
Synapse has enriched one closely related paper. Consider it for comparative context: