Answers are grounded in this paper and cite their sources.
Clarifying the overoxidation behavior of poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) under conditions relevant to aluminum electrolytic capacitors is essential for addressing its limitations in these devices and improving their reliability. However, despite the practical importance of PEDOT:PSS as a cathode medium, its overoxidation behavior is not yet sufficiently understood. In this study, the overoxidation behavior of PEDOT:PSS was evaluated under high cell voltages up to 10 V in a pseudo-cell consisting of a PEDOT:PSS film sandwiched between two electrodes. PEDOT:PSS undergoes irreversible oxidation only under high humidity or in the presence of ethylene glycol (EG). This overoxidation differs from the reversible electrochemical oxidation commonly observed in conducting polymers, which generates carriers such as polarons. A thermal treatment at 250°C with EG partially restored the electrical conductivity and electrochromic response of the overoxidized PEDOT:PSS. This result suggests that overoxidation occurs preferentially in regions that constitute the specific conductive pathways rather than throughout the entire film. Furthermore, ion chromatography, Raman spectroscopy, and density functional theory calculations suggested the formation of ethylenedioxythiophene oligomers with oxidized thiophene-ring sulfur. Based on the results of electrochemical impedance spectroscopy and the use of an electron-blocking (ion-conducting) cell, it is proposed that overoxidation occurs via a two-step mechanism: ionization of EG around the cathode and interfacial electrochemical reactions between PEDOT and ionized EG at the PEDOT:PSS/liquid interface, which then leads to the overoxidation of PEDOT:PSS.
No takes yet. Share an insight, caveat, or question.
Kaneko et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: