This is the authors' abstract. We don't add key points for this paper.
Poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS), a conductive polymer dispersion, is widely used in cathodes of solid electrolytic capacitors. However, it still suffers from performance limitations when used at high frequencies, and its withstand voltage must be improved. Herein, impregnation drying introduces a polyvinyl alcohol (PVA) coating onto alumina, which regulates the interface between the PEDOT:PSS cathode and alumina. The equivalent series resistance (ESR) of the capacitor is significantly reduced, whereas the withstand voltage is slightly improved. This study demonstrates that the presence of PVA enhances the wettability of PEDOT:PSS dispersions on alumina surfaces. Changes in the infrared peak positions of the OH and SO 3 H groups following the mixing of the PVA and PEDOT:PSS films, along with alterations in the thermal decomposition temperature, indicate the occurrence of crosslinking. Theoretical calculations demonstrate the presence of hydrogen bonds between the OH groups in PVA and the SO 3 H groups of PEDOT:PSS. Interface modulation effectively improves capacitor performance, as the capacitance ratio of capacitors with 400 V level withstand voltages increases from 97.35% to 98.85%, and the ESR at 100 kHz is significantly reduced by ≈40%. This study provides a valuable reference for the preparation of high‐performance solid electrolytic capacitors.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: