Answers are grounded in this paper and cite their sources.
Simultaneously enhancing strength and corrosion resistance in nonheat‐treatable Al–Mg alloys remains challenging, as severe plastic deformation often introduces defects that deteriorate corrosion performance. In this study, multipass rotary swaging (RS) was applied to a 5083 Al–Mg alloy to investigate the relationship between deformation‐substructure evolution and strength–corrosion synergy. RS significantly increased the fraction of low‐angle grain boundaries and geometrically necessary dislocation density, while the average grain size remained nearly unchanged. Coarse intermetallic particles were progressively fragmented and more uniformly redistributed. At an equivalent strain of 1.52, the yield and ultimate tensile strengths increased from 208 and 340 MPa to 432 and 470 MPa, respectively, while the corrosion current density decreased from 0.871 to 0.327 μA·cm −2 . The strength enhancement arises primarily from deformation‐substructure strengthening, while the improved corrosion resistance is attributed to particle fragmentation and reduced microstructural heterogeneity. These findings demonstrate that multipass RS can coordinate deformation‐substructure evolution and microstructural homogenization, providing a promising route toward strength–corrosion synergy in 5xxx‐series aluminum alloys.
No takes yet. Share an insight, caveat, or question.
Wang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: