Answers are grounded in this paper and cite their sources.
Development of lightweight composites capable of mitigating low‐velocity impact‐induced blunt trauma is critically important for improved protection. The impact response of multilayered ultra‐high molecular weight polyethylene (UHMWPE) laminates has been investigated by many researchers in the last two decades. This study presents a development where thermoplastic polyurethane (TPU) film as an interlayer is strategically incorporated in UHMWPE composite panels to reduce near mid‐plane shear‐induced damage and back‐face deformation (BFD). All composite panels are fabricated via compression molding and tested at 100, 250 and 350 J energy using a low‐velocity impact tester. Viscoelastic behaviour is evaluated using dynamic mechanical analysis (DMA), and surface morphology is examined by scanning electron microscopy (SEM). Initially, an optimal sequence of cross‐ply with ±22.5° fiber‐oriented [CP/±22.5°] laminate shows the highest BFD reduction (60.48%) compared to ±30° (41.17%) and ±45° (34.77%). Moreover, symmetric placement of two TPU films near the mid‐plane of this [CP/±22.5°] panel doubles the impact load transferability and further reduces BFD by ~22%. Here, the intrinsic nature of TPU film improves viscoelastic energy dissipation and interlaminar shear management, while [CP/±22.5°] architecture governs the global laminate stiffness. The present approach exhibits that a combination of optimized fabrication, structural composition, and fiber orientation significantly reduces BFD in lightweight UHMWPE composite systems.
No takes yet. Share an insight, caveat, or question.
Pramanick et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: