Answers are grounded in this paper and cite their sources.
Due to the high sintering temperature of traditional ceramics, most photocatalytic substances in the ceramic glaze will lose efficacy. In this study, the photocatalyst of ZnO-Zn2TiO4 were synthesized by the sol-hydrothermal method and sintered at 1300 ℃. The photocatalytic activity of ZnO-Zn2TiO4 was tested by the degradation of methylene blue (MB) under sunlight irradiation at room temperature. Then, selecting the best catalytic effect of ZnO-Zn2TiO4 was mixed with the ceramic glaze and sintered at 1300 ℃, which was also tested by the degradation of MB. The results showed that when the ZnO-Zn2TiO4 was the molar ratio of Ti:Zn = 1:8 and added into the ceramic glaze with 15% mass percentage after sintering 1300 ℃, it exhibited superior photocatalytic efficiency in degrading MB. This study presents a novel approach for preparing high-temperature (1300 ℃) glazes with enhanced photocatalytic properties.
No takes yet. Share an insight, caveat, or question.
Hu et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: