Answers are grounded in this paper and cite their sources.
The Euro IV emission standards for heavy-duty diesel vehicles require a substantial reduction in NOx emissions, spurring the introduction of selective catalytic reduction (SCR) systems. However, previous studies have found unsatisfactory control of NOx emissions for SCR-equipped urban buses, which has raised concern among policy-makers and researchers regarding the capability of SCR adopted by heavy-duty diesel trucks (HDDTs) in real-world applications. This study tested sixteen HDDTs in China between 2010 and 2014, including six SCR-equipped Euro IV HDDTs using a portable emissions measurement system (PEMS). On-road emission measurement results show no significant difference in NOx emissions between Euro II and Euro III HDDTs. In contrast, we observed a substantial reduction in real-world NOx emissions, as low as 25.4 g kg-fuel–1, for six SCR-equipped HDDTs (Euro IV) compared with those without SCR systems (Euro II and Euro III), providing an overall reduction of ~50%. However, real-world brake-specific NOx emission factors for the SCR-equipped HDDTs were higher by ~45% than the lab test limit of 3.5 g kWh–1 due to off-cycle NOx emissions, indicating the importance of introducing real-world emission test requirements for HDDTs. Due to the introduction of SCR systems, distinctive impacts from real-world operating conditions are observed for HDDTs. For example, fuel-based NOx emission factors steadily decrease as the vehicle speed increases due to higher exhaust temperatures, which improve the efficiency of SCR systems.
No takes yet. Share an insight, caveat, or question.
He et al. (2017) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: