Answers are grounded in this paper and cite their sources.
This paper discusses the advantage of utilizing a Co/Ru/Co synthetic antiferromagnet in the fabrication of spin valve heads suitable for high density magnetic recording. Benefits of using the synthetic antiferromagnet are: (1) the pinning field is over 6000 Oe; (2) magnetic stability is achieved over a wide temperature range with the sensor well biased at temperatures as high as 250/spl deg/C, because the pinning field is still higher than 3000 Oe at this temperature; (3) the pinned layer biasing mechanism is enhanced as the sensor height is reduced, and a 7.2% change in the resistivity is observed in a sensor with a 0.5 /spl mu/m height and a 0.7 /spl mu/m trackwidth; (4) the free layer bias state is easily attainable in sensors with small height (<1 /spl mu/m), as a consequence of the particular magnetic configuration of the synthetic antiferromagnet, which promotes an almost vanishing magnetostatic field; and (5) the sensor is only 17 nm thick.
No takes yet. Share an insight, caveat, or question.
Leal et al. (1999) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: