This is the authors' abstract. We don't add key points for this paper.
Under the normal temperature and pressure conditions, ammonia (NH₃) synthesis experiments were conducted by the self-developed dielectric barrier discharge (DBD) plasma device. The effects of typical processes and discharge parameters, including the total flow rate of reaction gas, volume ratio of reaction gas, discharge power, discharge frequency, plasma volume on NH₃synthesis rate, and yield, were studied and analyzed. In addition, the effect of Ru/γ-Al₂O₃catalysts was investigated on nonthermal plasma-assisted ammonia synthesis. The results show that the NH₃synthesis rate and yield are relatively high when the total flow rate of reaction gas is about 120mL⁻¹and the volume ratio of N₂and H₂is 1:2. With the discharge power of 33.6 W and a plasma volume of 18.37 mL, the system exhibits uniform and stable discharge, resulting in an energy yield of approximately 190mg⁻¹⁻¹. By adjusting the discharge frequency to 8.2 kHz, which is in resonance with the experimental system, the NH₃synthesis rate reaches its maximum. The use of 2%Ru/γ-Al₂O₃as a catalyst resulted in the highest NH₃synthesis rate of 34.3⁻¹, which is 3.5 times higher than that obtained without a catalyst.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Zhao et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: