Answers are grounded in this paper and cite their sources.
Metal matrix composites (MMCs) processed with significant technological interventions offer excellent properties at reduced cost resulted in a wide range of engineering applications. In MMCs, ensuring homogeneous dispersal of reinforcement in metal matrix to obtain aggregate properties in composites still remains as a challenging task. Industrial waste-based fly ash (FA) particles were used as a reinforcement material to fabricate Al 6113 composites. Ultrasonic- assisted stir casting technique was employed to prepare composites. FA particles with different weight proportions (3, 6 and 9 wt.%) are reinforced to prepare the composites and examine their properties (micro-hardness, compressive strength and wear rate). Furthermore, properties are also examined for the prepared as-cast composites subjected to heat treatment conditions. Microstructural analysis confirms, 6% FA particles are fairly and evenly distributed in Al6113 matrix material resulted in best properties. Al6113 with 6% fly ash particles improves 8.68% hardness and 61.6% compression strength of the compared to as-cast Al6113 specimen. Heat-treated composites showed a significant improvement from 73.7 to 82.5 HV for hardness, 75.61 to 130.7 MPa for compression strength, and decreased values in wear rate from 0.9233 to 0.4298 mm3/min, and Coefficient of Friction (CoF) from 0.648 to 0.319 compared to as-cast Al 6113 specimens.
No takes yet. Share an insight, caveat, or question.
Vinayaka et al. (2021) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: