Answers are grounded in this paper and cite their sources.
This study reports the controlled fabrication of TiO 2 nanotubes (TNTs) via electrochemical anodization and evaluates the influence of anodization time and annealing temperature on their structural, crystalline, and photocatalytic properties. FESEM analysis reveals that nanotube length increases from 3.5 to 8.1 μm with anodization time (1 to 2 hr), accompanied by variations in diameter (81–92 nm) and wall thickness (around 14–25.5 nm), yielding high aspect ratios up to 88.2. XRD confirms pure anatase formation in the A-set (360 °C) and mixed anatase/rutile phases in the B-set (480 °C), with crystallite sizes around 37–44 nm. Bandgap tuning (down to 2.59 eV) enables visible-light activity without doping. Photocatalytic studies using Methylene Blue show that the optimized anatase sample (A3) achieves 42% (UV) and 47% (sunlight) degradation, which increases to 45.4% and 50.9% with hydrogen peroxide in 120 min. Kinetic analysis follows pseudo-first-order behaviour, with A3 exhibiting superior rate constants compared to mixed-phase samples. Despite literature favouring mixed phases, the results demonstrate that optimized anatase with tailored morphology and bandgap can deliver enhanced photocatalytic performance, highlighting its potential for wastewater treatment applications.
No takes yet. Share an insight, caveat, or question.
Arsha.A. et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: