Answers are grounded in this paper and cite their sources.
Background and Aim: This study compared the flexural strength (FS) of heat-cure acrylic resin following one-and two-step processing techniques in dry and wet conditions. Materials and Methods: In this in vitro study, 60 acrylic specimens (31065 mm) were fabricated (ISO20795-1) and flasked using a type III dental stone. The specimens were heated to 70C for one hour and baked for 30 minutes at 100C. After cooling and polishing, 30 specimens were randomly selected; of which, 15 were stored in 37C water, and 15 in dry condition for one month. The remaining 30 were flasked again, baked, and divided into two subgroups for storage in dry and wet conditions. The FS of specimens was measured by a universal testing machine. Data were analyzed by one-way ANOVA and Tukey's post-hoc test (=0.05). Results: The mean FS was 57.54.8 MPa and 61.74 MPa for specimens subjected to one-step processing and stored in wet and dry conditions, respectively. These values were 56.64 MPa and 64.72.9 MPa for specimens subjected to two-step processing and stored in wet and dry conditions, respectively (P<0.05). The difference in FS of specimens stored in dry and wet conditions was significant (P<0.05).
No takes yet. Share an insight, caveat, or question.
Pour et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: