Answers are grounded in this paper and cite their sources.
The sequential digital design and manufacturing of components play a crucial role in realizing the industrial potential of directed energy deposition (DED), particularly when employing an electric arc as the energy source to melt a filler wire (DED-ARC). This study explores the application of DED-ARC for manufacturing large-scale, load-bearing structures, using a railway bogie as a case study. Originally a cast Bettendorf-type design, the bogie was redesigned using a multi-material approach. High-strength low-alloy (HSLA) steel was utilized in high-stress areas, while low-carbon steel was used elsewhere to reduce mass, enhance manufacturability, and improve repairability. The workflow included computer-aided design (CAD), topological optimization, finite element analysis (FEA), material selection, and iterative CAD modifications to address process constraints. The redesigned bogie underwent pre-manufacturing, fabrication, and a final scan of the as-built part. Representative multi-material wall samples were characterized, revealing typical microstructures and elastic limits of 468 MPa and 737 MPa for ER70S-6 and ER100S-G, respectively. These tensile properties were incorporated into FEA verification simulations, demonstrating a higher safety factor compared to the original design. A CAD-to-part analysis, including scan comparisons, highlighted manufacturing-induced deformation, material-dependent over-thickness, and localized geometric variations. This study offers a comprehensive overview of the DED-ARC process, from design through characterization, and demonstrates its capability to produce high-quality industrial components. The findings underscore the manufacturability and potential of DED-ARC for fabricating robust, multi-material structures for demanding applications.
No takes yet. Share an insight, caveat, or question.
Queguineur et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: