Answers are grounded in this paper and cite their sources.
Three different kinds of modified starch (MS) were prepared as fillers to assess the compatibility between them and poly(lactic acid) (PLA) resin. The blends were prepared by incorporating 15 wt% of the MS into PLA using a twin‐screw extruder. Through morphology analysis, it can be seen that the dispersion state of MS granules was greatly different. Investigations of thermal behavior indicated that the addition of MS decreased thermal properties which found expression in the decrease of melting temperature and vicat softening temperature (VST). But thermal stability of PLA/maleic anhydride grafted starch (MA‐ g ‐ST) was slightly higher than those of other blends. PLA/MA‐ g ‐ST blend exhibited the highest notched impact strength, elongation at break, and tensile strength, which means MA‐ g ‐ST was suitable as a filler improving the toughness of PLA. It was also proved that biodegradability rate of blends increased dramatically and reached up to 1.80, 1.89, 1.44 g day −1 after 60 days, respectively. POLYM. COMPOS., 2011.
No takes yet. Share an insight, caveat, or question.
Gao et al. (2011) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: