Answers are grounded in this paper and cite their sources.
Multi-stage compound channels have more than one floodplain on each side of the main channel. In these channels, when the flood occurs and the main channel is filled, the first floodplain is activated, and then when this floodplain overflows, the second floodplain immediately participates. In this study, three parameters of the two-dimensional model of Shiono and Knight (SKM) including Manning roughness coefficient (nf), turbulent eddy viscosity (λ) and secondary flow coefficient (β) are calibrated for multi-stage compound channels. Through calibration process, it was found that the effect of eddy viscosity and secondary currents in these channels is significant and should be considered. The calibrated SKM showed a good agreement between the observed and calculated lateral velocity and also bed shear stress distributions, total flow discharges as well as the zonal flow rates. Mean and maximum errors in estimating the total flow discharges were 4.1% and 9.7%, respectively. These errors for main channel were obtained as 4.9% and 10.6%, respectively. Meanwhile, the vertical divided channel method, widely used in water engineering packages, with an average error of 23% and a maximum error of 32% does not provide reliable results for total flow discharges.
No takes yet. Share an insight, caveat, or question.
Aminnejad et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: