This is the authors' abstract. We don't add key points for this paper.
The authors report the growth of epitaxial Zr(0 0 0 1) thin films on Al2O3(0 0 0 1) substrates at a temperature of 700 °C via dc magnetron sputtering in an ultrahigh vacuum deposition system equipped with facilities for chemical vapor deposition, low-energy electron diffraction, and Auger electron spectroscopy. Zr layers with a nominal thickness of ∼220 nm are deposited at a rate of ∼0.06 nm/s in 10 mTorr Ar atmosphere. In situ Auger electron spectra of the as-deposited film surface reveal the presence of a Zr peak at 145 eV and Hf peak at 172 eV, the latter due to the presence of Hf impurities in the Zr sputter target. In situ low-energy electron diffraction patterns acquired from the Zr sample show sixfold symmetric spots with an in-plane lattice spacing of 0.31 ± 0.02 nm, characteristic of Zr(0 0 0 1)–(1 × 1) surface. Cross-sectional transmission electron microscopy images reveal columnar growth and the formation of a crystalline, 22 ± 8 nm thick, interfacial layer. Energy dispersive x-ray spectra obtained from this region reveal the presence of both Zr and Al. The authors attribute the formation of this interfacial layer to plasma-induced substrate decomposition during sputtering followed by interdiffusion of Al and Zr at the film–substrate interface. ω-2θ x-ray diffraction data show that the Zr layers are single-phase with hexagonal close-packed structure. Using high-resolution symmetric as well as asymmetric reciprocal space maps, the authors determined that the film is fully relaxed with in-plane and out-of-plane orientation lattice parameters of 0.324 and 0.516 nm, respectively, and identified epitaxial orientation relationships as Zr(0 0 0 4) ‖ Al2O3(0 0 0 12) and Zr(101¯0) ‖ Al2O3(112¯0).
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Fankhauser et al. (2016) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: