Answers are grounded in this paper and cite their sources.
Tunable and switchable Ba 0.5 Sr 0.5 TiO 3 film bulk acoustic resonators (FBARs) based on SiO 2 /Mo Bragg reflectors are explored, which can withstand high temperature for the deposition of Ba x Sr 1− x TiO 3 (BST) films at 800 °C. The dc bias-dependent resonance may be attributed to the piezoelectricity of the BST film induced by an electrostrictive effect. The series resonant frequency is strongly dc bias-dependent and shifts downwards with dc bias increasing, while the parallel resonant frequency is only weakly dc bias-dependent and slightly shifts upwards at low dc bias (< 45 V) while downwards at higher dc bias. The calculated relative tunability of shifts at series resonance frequency is around −2.3% and the electromechanical coupling coefficient is up to approximately 8.09% at 60-V dc bias, which can be comparable to AlN FBARs. This suggests that a high-quality tunable BST FBAR device can be achieved through the use of molybdenum (Mo) as the high acoustic impedance layer in a Bragg reflector, which not only provides excellent acoustic isolation from the substrate, but also improves the crystallinity of BST films withstanding higher deposition temperature.
No takes yet. Share an insight, caveat, or question.
Yang et al. (2012) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: