This is the authors' abstract. We don't add key points for this paper.
The electrical characteristics of InP grown by molecular beam epitaxy (MBE) using a valved phosphorus cracking cell are presented. Stoichiometric growth of InP was achieved with a beam equivalent pressure as low as 5×10−7 Torr and 1 μm/h InP growth rate. The efficiency of the solid source is high, consuming on average only ∼0.09 g of phosphorus per μm of InP growth with the beam equivalent pressure ∼1.5×10−6 Torr. The conductivity of the unintentionally doped layers is n-type, with the electrical background concentration primarily dependent upon the valved cell cracking zone temperature. Electrical carrier concentrations at 300 K ranged from 2.9×1015 cm−3 to 3.3×1016 cm−3. The lowest backgrounds were achieved with the lowest cracking zone temperatures. Low temperature photoluminescence shows impurity related emission at 1.383 eV.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Baillargeon et al. (1994) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: