Answers are grounded in this paper and cite their sources.
Summary Steam/solvent coinjection has been studied as a potential method to improve the efficiency of conventional steam-assisted gravity drainage (SAGD) for bitumen recovery. This research is part of an experimental program for phase behavior of Athabasca-bitumen/solvent mixtures. This paper presents a new set of experimental data for phase equilibrium, viscosity, density, and asphaltene precipitation for 11 mixtures of Athabasca bitumen with n-hexane and 10 mixtures of the same bitumen with n-octane. Phase-boundary measurements were conducted at temperatures up to 160°C and pressures up to 10 MPa. The bitumen sample used in this research was studied in our previous research, in which the same bitumen was not effectively diluted by n-butane because of the coexistence of a butane-rich liquid with a bitumen-rich liquid phase. In this research, the liquid/liquid separation of hydrocarbons was not observed for n-hexane/bitumen (HB) and n-octane/bitumen (OB) mixtures for the range of temperatures and pressures tested, even at solvent concentrations higher than 90 mol%. This observation indicates that the amount of solvent available near the edge of a steam chamber is expected to be entirely used for bitumen dilution beyond the chamber edge in coinjection of steam with heavier hydrocarbon solvents, such as n-hexane and n-octane. Experiments for asphaltene precipitation at atmospheric pressure showed a larger amount of precipitates with n-hexane than with n-octane at a given solvent concentration higher than 50 wt%. For solvent concentrations less than 50 wt%, no asphaltene precipitation was observed for both solvents with the bitumen sample tested in this research.
No takes yet. Share an insight, caveat, or question.
Gao et al. (2017) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: