Answers are grounded in this paper and cite their sources.
In the modeling of wave-dissipating blocks for wave overtopping simulations over wave-dissipating block seawall, the so-called porous models have been widely used. In conventional porous models, resistance for fluid is evaluated by applying semi-empirical experimental constants to the target permeable area, neglecting local flow velocities through the gaps between the blocks. This results in poor reproducibility, especially under wave-breaking conditions where complex flow through the gaps between the block becomes prominent. To address this issue and to reproduce the complex local flow field within the wave-dissipating blocks area, this study proposes a novel permeable boundary model that explicitly represents the shielding regions and flow channels by a group of blocks and thereby aims to achieve an enhanced wave overtopping simulation targeting a seawall with wave-dissipating blocks with a practical computational load. In the proposed model, the 3-D arrangement characteristics of individual wave-dissipating blocks are projected onto a 2-D cross-section, and the boundaries of the flow paths between the blocks are given by fixed particles. The proposed model is implemented into a particle method, and simulations of wave overtopping over wave-dissipating block seawalls are conducted to verify the reproducibility of overtopping flow rates and an observed process of wave overtopping.
No takes yet. Share an insight, caveat, or question.
Gotoh et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: