This is the authors' abstract. We don't add key points for this paper.
High-strength low-alloy (HSLA) steel HSLA-100, being equipped with numerious advantages, has been widely used in many areas, especially in the construction of naval ships and submarines. However, the in-service defects, which are prone to happen in actual application scenarios, greatly degrade the performance. In this work, laser metal deposition (LMD) process was used to repair the defects of HSLA-100 plates, and the strategy of low transformation temperature (LTT) alloys was adopted to control the residuals stress distribution during the repairing process. Two types of LTT powders, namely LTT1, and LTT2 were developed, and the microstructure, residual stress, mechanical properties, as well as the corrosion resistance of repaired samples under LTT materials were compared to that under conventional GH3536 materials. The results show that the repairing materials present excellent metallurgical bonding with the substrate without obvious element segregation. Besides, X-ray diffraction (XRD) and electron-backscatter diffraction (EBSD) confirmed that the microstructure of samples repaired by LTT was mainly composed of lath martensite (93 %), while the sample repaired by GH3536 exhibited fish-scale-like austenite with a few thermal cracks generated on the surface. Hardness of the repaired zone revealed an obvious increase trend for LTT when compared to that of GH3536 (∼360 HV vs. ∼225HV). In addition, XRD tests and finite element simulation demonstrated the effectiveness of the developed LTT materials in tensile residual stress regulation. At last, mechanically tensile, fatigue, and corrosion resistance tests revealed the excellent performance of the LTT-based repaired samples for application in harsh condition.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Cheng et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: