Answers are grounded in this paper and cite their sources.
The methods used to size inhalation aerosol a and the problems involved in producing an homogenous cloud of aerosol particlea are reviewed. Particle size analyses were carried out using a Royco 225/508 particle size analyser. A number of variables such as sensor head position have been examined under conditions of constant temperature and humidity. It is shows that a dilution of the aerosol cloud into a large volume (360 1) gives a satisfactory number of particles in the sample volume. The positioning of the sensor head is not critical provided that adequate air turbulence can be generated using sleeved sintered-bearing fans. The air flow rate sust be controlled so that air passes over the sensor at not anre than 0.58 m.s−1. The length of time required to produce a uniform diatribution is shown to be about 10 secs.
No takes yet. Share an insight, caveat, or question.
Daviea et al. (1980) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: