This is the authors' abstract. We don't add key points for this paper.
A continuous electroless-plated Cu film only 10 nm thick was successfully deposited on a TaN barrier over a 1-nm-thick Pd catalytic layer formed by ionized cluster beam deposition. Secondary ion mass spectrometry (SIMS) analyses for the electroless-plated Cu films on the 20-nm and 1-nm ionized cluster beam (ICB)–Pd layers showed that the Pd metal had diffused into the Cu and caused a high electrical resistivity of Cu interconnect. The electrical resistivity of Cu interconnects formed by electroless plating on an ICB-deposited Pd catalyst layer decreased with decreasing thickness of the ICB–Pd layer. At an ICB–Pd layer thickness of 1-nm, the electrical resistivity of the overlying Cu interconnect was . Moreover, the deposited film has adhesion strength as high as that of sputtered Cu on TaN, even for the case of the 1-nm-thick Pd catalyst layer. A uniform and continuous 10-nm-thick Cu seed layer was formed by electroless plating over a 1-nm-thick Pd layer, and subsequent Cu electroplating filled all high-aspect-ratio via holes without the appearance of voids.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Wang et al. (2005) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: