Answers are grounded in this paper and cite their sources.
We studied the effects of different types of hot-dip coatings and passivation treatments on cross-sectional morphology, adhesion to polyethylene (PE), and bonding energy. The results revealed that the bonding force of a hot-dip Zn–Al coating on a steel strip to PE is 196.3 N. The adhesion of Zn–Al and Zn–Al–Mg to PE before passivation was increased by 84.6% and −31.1% higher than that of Zn and PE. After passivation, the adhesion of Zn–Al and Zn–Al–Mg to PE was increased by 63.8% and −46.6% higher than that of Zn and PE, respectively. Passivation treatment can effectively improve the bonding between hot-dip coatings and PE. The bonding strengths of the hot-dipped Zn, Zn–Al, and Zn–Al–Mg to PE increased by 73.3%, 26.6%, and 33.3%, respectively, following passivation. The application of a silane coupling agent to the passivator formed chemical bonds on the surface of the hot-dip coatings, which improved the adhesion between the coatings and resin. Overall, utilising a hot-dip Zn–Al coating instead of a pure zinc coating (containing 0.01% Al) can improve the adhesion between the coating and PE in steel-strip-reinforced PE spiral-corrugated pipe (MRP), thereby improving the application performance of the MRP.
No takes yet. Share an insight, caveat, or question.
Zheng et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: