This is the authors' abstract. We don't add key points for this paper.
The correlation between the luminescent properties and structural characteristics of ZnGa2O4:Mn phosphor thin films has been investigated. The ZnGa2O4:Mn films have been prepared by radio frequency planar magnetron sputter deposition from a 2 mol. % Mn-doped ZnGa2O4 target in an Ar-O2 gas mixture whose pressure ranged between 2 and 20 mTorr. Films deposited at gas pressures above 10 mTorr showed a random crystallographic orientation, while the films deposited ≤10 mTorr exhibited a preferential orientation of the [110] direction perpendicular to the film surface. Internal stress in the ZnGa2O4:Mn films became increasingly compressive upon decreasing the gas pressure, reaching a value of ∼1.7 × 1010 dyne/cm2 at 2 mTorr. The observed change in internal stress correlated with the changes in the crystalline structure of the films. After a post-deposition anneal at 800 °C, the crystallinity of the films was improved. The rms surface roughness of the annealed ZnGa2O4:Mn films did not systematically depend on the gas pressure. Both photoluminescence (PL) and cathodoluminescence (CL) resulted in green light, and the emission peaked at ∼505 nm. This was attributed to the Mn2+ 3d-3d intrashell 4T1 → 6A1 transition. The intensities of both PL and CL emission increased as the gas pressure decreased, presumably due to the better crystalline quality with a highly [110]-textured structure and a more densely-packed microstructure in the ZnGa2O4:Mn films deposited at lower pressures.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Kim et al. (2012) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: