Answers are grounded in this paper and cite their sources.
Superhydrophobic porous membranes are materials that are used for oil-water separation. However, conventional fabrication methods present limited scalability, complex processing, and poor membrane morphology control. In this study, a modular alternative based on 3D printed membrane was investigated. Microporous membranes, composed of polypropylene (PP)/graphene nanocomposites, were fabricated by the fused filament fabrication (FFF) method and subsequently surface-modified via dip-coating, using coatings based on polydimethylsiloxane (PDMS), silica nanoparticles, and/or graphene nanosheets. Untreated pure PP membranes exhibited a water contact angle (WCA) of 117.9°, which increased to 123.3° when graphene was incorporated into the PP matrix. Besides, the surface treatment increased the membranes’ WCA up to 132.59°. Filtration tests demonstrated high oil-water separation efficiency, achieving up to 99%. These results highlight the synergism between additive manufacturing and nanostructured surface treatments.
No takes yet. Share an insight, caveat, or question.
Correia et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: