Answers are grounded in this paper and cite their sources.
The effects of aging treatment and Cu addition on the corrosion behavior of Al–Zn–Mg alloys were systematically investigated via mechanical, electrochemical, and microstructural analyses. Aging enhanced strength through η-phase precipitation and reduced Zn and Mg in the matrix, thus causing a noble shift in corrosion potential and a decrease in corrosion current density. By contrast, Cu addition increased the corrosion potential but significantly increased the corrosion current density, thereby indicating deteriorated corrosion resistance. The Base alloy exhibited passivation followed by pitting, whereas the High-Cu alloy showed active dissolution with virtually no passive regions. With increasing Cu content, the corrosion morphology evolved from pitting to grain boundaries and intragranular corrosion owing to a transition from anodic Zn–Mg precipitates to cathodic Cu-rich sites. These results reveal that corrosion behavior is governed by the relationship between matrix composition and micro galvanic interactions. Additionally, the findings provide design guidelines for optimizing the tradeoff between strength and corrosion resistance in high-strength Al alloys.
No takes yet. Share an insight, caveat, or question.
Manaka et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: