Answers are grounded in this paper and cite their sources.
This study investigated the feasibility of deriving deflection bowl parameters (DBPs), which are obtained from falling weight deflectometer measurements, directly from deflection slopes reported by the traffic speed deflectometer (TSD). Focus was placed on evaluating four popular DBPs, namely, (i) central deflection ( D 0 ); (ii) surface curvature index (SCI); (iii) base damage index (BDI); and (iv) base curvature index (BCI). To achieve this, one million pavement configurations were simulated in a layered elastic model to generate synthetic DBPs and corresponding TSD slopes. A multivariate linear regression model was formulated with synthetic TSD slopes as the independent variables and DBPs as the dependent variables. The model was shown to successfully estimate SCI, BDI, and BCI with acceptable error margins for pavement management applications. However, predictions for D 0 exhibited errors that were too high. As the analysis here was based on perfect data, these results should be considered the “best performers” in terms of what can be achieved with a linear model. Moreover, the study revealed that strong correlations are to be expected between TSD slopes reported by adjacent sensors. Subsequently, it was demonstrated how such correlations may be leveraged to estimate data quality and detect anomalies in field measurements.
No takes yet. Share an insight, caveat, or question.
Levenberg et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: